Product Description
Suffering from spark blowout issues on your underpowered OEM coils? The JDC Ignition System is what you need! The JDC Coil-On-Plug Ignition System is a direct replacement to your factory Evolution 4-9 coils and wires and simply plugs in and bolts down! No assembly required! Simply remove the setup from the box and install it on the car. This system utilizes 100% authentic high performance, Japanese made Denso Ignition Coils, not the cheap off brand coils that won't perform as well or last as long.
The JDC Coil-On-Plug Ignition System is made in the USA. These systems are guaranteed to perform the same as SparkTech/ Spoolin' Up non-cdi systems! The JDC systems have been on the market since 2015 and have proven to be one of the best performing and reliable systems out there!
Applications:
- Works with all Evo 4-9 USDM/JDM models (select the correct option according to the valve cover you have. Evo 9 with MIVEC is different than Evo 4-8.)
- This ignition system is designed for use with the stock ECU and are compatible with AEM EMS V1 & V2, Haltech, MegaSquirt and the SunAuto Hyperforce. This system will NOT work with CDI boxes or the HKS DLI, and are not needed to meet your power goals up to 913whp+.
Features:
- 3 Year warranty on new Denso coils
- Lifetime warranty on wire harness and mounting plate
- Fits under OEM spark plug cover and most aftermarket covers
- Tested to 913whp @ 0.020" plug gap
- Military spec wire sheath, rated to 428degF
- Military spec tefzel wire, rated to 393degF
- Waterproof seals on all ports
- Plug and Play (no assembly required)
- No retune needed after install
- Gain 8-20 HP/TQ (mod dependent)
- Greatly reduce or eliminate partial throttle bucking
- Better overall idle quality
- Quicker and easier start, especially in colder weather with E85
- Run more boost without spark blowout issues
- Run more gap for better fuel burn and increased mpg
- Plugs last longer due to less fouling
- Makes changing plugs extremely simple
- No problem prone CDI boxes to worry about
- Choice of satin black anodized 6061 billet aluminum, solid carbon fiber, or Titanium mounting plate
- Choice of standard or "Hideaway" wire harness
- Choice of stainless steel or titanium hardware
What's in the box?
- Assembled JDC Coil-On-Plug Ignition System
- Mounting Hardware
- 15A Fuse
- Installation Instructions & warranty information
About the Hideaway Harness Option:
- This harness uses the same high quality connectors, military spec tefzel wire, and wire sheath as our standard COP wire harness, but this one hides under the mounting plate for a super clean, wire tucked look! This harness offers the same quality and performance as you'd expect from any product offered by JD Customs USA. This harness is sold separately, or can be added to any of our ignition system options for an additional $30.
How is this harness different?
- Both leads come out from the valve cover on the right side and are concealed by a single wire sheath. The right side connector makes its hidden connection behind the thermostat housing and the left side lead can be ran under or over the intake manifold to make its connection behind the valve cover for another hidden connection.
