This kit includes new rotors, brake pads, and stainless steel brake lines to improve the braking performance of your vehicle.
FRONT LOCATION
FITMENT NOTE: For all 02/03 WRX owners, please verify pad fitment before purchase. There was a front caliper design change mid production year. This will be determined by the BUILD DATE (not model year), which is found on the VIN plate in the driver’s side door jam. Alternatively, you can compare your existing pad shape to our online photos.
This style of pad is confirmed for all WRX models with a date of 06/02 and later.
For any questions about what pads you need, please reach out to us!
FACTIONFAB SWEPT SLOT BI-DIRECTIONAL ROTOR PAIR FRONT
- Front location
- Shallow Sharp-edged groves are milled into a high carbon cast iron disc to provide consistent pad contact and maximum friction over repetitive use
- High-carbon content for wear resistance, thermal stability, and cracking resistance
- Bi-directional design, meaning rotors are not side specific
- Symmetric vane castings to increase heat dissipation efficiency and thermal stability
- Double-disc ground, non-directional finish
- Mill balanced for reduced vibration
- Precision machined with run-out spec of no more than .002″, Disc Thickness Variation (DTV) of .0005″
- Fully machined non-friction surfaces for perfect fitment
- Electronically applied E-coating for corrosion resistance
- 400-hour salt spray tested
- Fully coated inside and out
FACTIONFAB F-SPEC FRONT BRAKE PADS
- Front location
- Para-Aramid Composition
- Ideal for auto-x, light track days, or aggressive street driving
- 1300ºF maximum operating temperature to aid in fade resistance
- Excellent modulation and initial bite
- Pre-scorched compound to aid in cold weather modulation
- O.E. gas slots and chamfers ensuring for safe efficient stopping while reducing noise associated with vibration
- Positive molded technology provides safe and reliable stopping performance for the entire service life of the brake pad
- Positive molded technology manufacturing process uses extreme pressure to compress the friction material and drives out any impurities or excess resins found in the brake pad
- Precision cut backing plates ensure correct pad fitment in the caliper body eliminating vibrations and noise under braking
- Mechanically attached application specific pad shims are designed to eliminate noise associated with brake pad vibrations
FACTIONFAB STAINLESS STEEL BRAKE LINES
- Front location
- PTFE Teflon inner liner to carry the fluid
- Stainless steel woven middle layer for support of the inner liner
- Abrasion-resistant, impact-resistant
- Outer PCV clear abrasion resistant coating to aid in chaffing and protects the inner layers and stress relief at fitting locations
- Each line is 4500psi burst pressure tested
- Stainless steel precision machined fittings for perfect fit and corrosion resistance
- Increased pedal feedback as a result of elimination of soft rubber lines which are prone to swelling and deforming
- 100% model specific for perfect fitment
- Includes hardware
