Product Description
DSS Toyota Supra 1986-1992 Turbo Manual / 1989-1992 Turbo Automatic 1-Piece Aluminum Shaft TOSH2
This is the Aluminum replacement shaft for the 86-92 Supra Turbo manual and 89-92 Turbo Automatic. The 1-piece driveshaft is a complete 6061-T6 3″ aluminum shaft that is approximately 20lb less than the factory 33lb 2-piece and will give the car a faster throttle response due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. This aluminum shaft will also be significantly more torsional than the factory steel shaft, resulting in a noticeably smoother ride and power transfer in a higher horsepower car. Available for most popular motor/trans combinations, if you don’t see yours listed, custom shafts are also available..
Please Note: This driveshaft is for the 86-92 Supra Turbo 5-Speed and 89-92 Turbo Automatic ONLY and will not fit the 86-88 Turbo Automatic or 86-88 Turbo Automatic with 5-Speed conversion. Use driveshaft part number TOSH3 (Aluminum) and TOSH3-S (Steel)
Driveshaft Shop Driveshafts are built to handle not only the power of drag and drift cars but also add to the efficiency of these types of racing. Aluminum has been used in drive shafts for years but most people think its just because they are lighter - Were you aware they are more torsional?
By being able to twist more than a steel shaft it will not only make the ride smoother but it will also take some of the harmful shock factor out of the drive train helping to keep up the RPM. This will also help to save most output shafts and other related drive train parts down the line. The aluminum shaft also has a higher resonant frequency than steel (a steel shaft will act as a amplifier of vibration). An aluminum shaft will deaden the vibration due to its characteristics.
Additional Information
| Weight | 40 lbs |
|---|---|
| Dimensions | 55 × 6 × 6 in |
