Product Description
Antigravity 16in Clampless Starting Harness (For Sport Micro-Start)
16″ Clampless Starting Harness (SPORT Older XP1, XP3)
Clampless Starting Harness that connects directly to battery so you can easily jump-start your vehicle. Saves time with no need for clamps or removing the seat on your motorcycle.
- 16 inches long.
- Works with SPORT, and OLDER designs of XP-1 and XP-3 Micro-Starts.
- Ring terminals connect directly to your battery.
- Other end can plug into the Micro-Start’s jumpstart port.
CLAMPLESS STARTING HARNESS
Accessory for Micro-Start SPORT (and Older XP-1 or XP-3 models)
The MICRO-START Clampless Harness was made so that a rider or driver can easily jump-start their vehicle using just their Micro-Start without the need for the jumper clamps, or having to remove the seat on your motorcycle. It is a 16-inch harness that connects directly to the battery with ring terminals while the other end can plug directly into the Micro-Start’s jumpstart port. It adds convenience and saves time if the situation arises when you have to jump start your vehicle. Simply connect the Micro-Start directly to this harness and jump-start your vehicle. No need to get out your Micro-Start clamps!
Please refer to the images below to see how the tips differ between the Starting Harnesses. The XP-10 harness connector is curved. The Old XP-3 and XP-1 harness tips are an EC5 connector. The New XP-3 and XP-1 have thermal protection and you can see the pin hole in its connector tip.
SAFETY NOTES:
- The MICRO-START is for Jump-Starting ONLY through the Jump-Start port!
- Never leave the Micro-Start connected to your vehicle’s battery for longer than 30 seconds, or use in place of your regular battery in your vehicle.
- Use only the provided chargers in the Micro-Start’s kit to charge the Micro-Start.
